Table Of Contents

Sound Nodes

Last Modified: December 5, 2016

node_icon
Stops acquisition of data, clears the buffer, returns the task to the default state, and clears the resources associated with the task. The task becomes invalid.
node_icon
Configures a sound input device to acquire data and send the data to the buffer. Use Sound Input Read to read the data.
node_icon
Reads data from a sound input device. You must use Sound Input Configure to configure the device.
node_icon
Starts data acquisition from the device. This node is necessary only if Sound Input Stop has previously been called.
node_icon
Stops data acquisition from the device. Use Sound Input Clear to clear the data in the buffer. Use Sound Input Start to restart the acquisition after calling Sound Input Stop.
node_icon
Stops the device from playing sound, clears the buffer, returns the task to the default state, and clears the resources associated with the task. The task becomes invalid.
node_icon
Configures a sound output device to generate data. Use Sound Output Write to write the data to the device.
node_icon
Returns information about the current state of a sound output task.
node_icon
Sets the volume at which the sound output device plays.
node_icon
Starts playback from the device. This node is necessary only if Sound Output Stop has previously been called.
node_icon
Stops the device from playing sound from the buffer. Use Sound Output Clear to clear the data in the buffer. Use Sound Output Start to restart output.
node_icon
Waits until all of the sound is played by the output device.
node_icon
Writes data to a sound output device. You must use Sound Output Configure to configure the device if you are writing continuously.

Recently Viewed Topics