Performs single-shot element-wise alignment of waveforms and returns the aligned waveforms.
Timestamp of the waveform outputs.
|common||0||Uses common timestamp.|
|global||1||Uses global timestamp.|
An array of waveforms to align.
Algorithm this nodes uses to perform alignment of waveforms.
|coerce||0||This node sets each output sample value to the input sample value that is closest to it in time.|
|linear||1||This node sets each output sample value to the linear interpolation between the two input samples that are closest to it in time.|
|spline||2||This node uses the spline interpolation algorithm to compute the resampled values.|
|FIR filter||3||This node uses a finite impulse response (FIR) filtering algorithm to compute the resampled values.|
Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.
Default: No error
Minimum values this node needs to specify the FIR filter.
Minimum attenuation level of signal components aliased after any resampling operation.
Fraction of the new sampling rate that is not attenuated.
Error information. The node produces this output according to standard error behavior.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported