Table Of Contents

MT MLSE Demapper (MSK) (G Dataflow)

Last Modified: January 9, 2017

Maps an MSK-modulated complex baseband waveform to an output bit stream using maximum likelihood sequence estimation (MLSE). The node expects the input complex waveform to be synchronized, in every aspect, to the receiver.

spd-note-note
Note  

This node assumes that the sample rate of the input complex waveform is exactly samples per symbol × the symbol rate. If this relationship does not apply to your application, use MT Resample (Complex Cluster) to resample the waveform to the desired sample rate.

connector_pane_image
datatype_icon

input complex waveform

The modulated complex baseband waveform data.

datatype_icon

t0

Trigger (start) time of the Y array.

Default: 0.0

datatype_icon

dt

Time interval between data points in the Y array.

Default: 1.0

datatype_icon

Y

The complex-valued signal-only baseband modulated waveform. The real and imaginary parts of this complex data array correspond to the in-phase (I) and quadrature-phase (Q) data, respectively.

datatype_icon

MSK system parameters

Parameter values defining the MSK system. Wire the MSK system parameters cluster of MT Generate MSK System Parameters to this cluster. Do not alter the values.

datatype_icon

differential encoding enable

Status of the differential encoding.

Name Description
disable

Disables differential encoding for input symbols.

enable

Enables differential encoding for input symbols.

Default: enable

datatype_icon

samples per symbol

An even, positive number of samples dedicated to each symbol. Multiply this value by the symbol rate to determine the sample rate.

Default: 16

datatype_icon

pulse shaping filter coefficients

An ordered array containing the coefficients of the pulse-shaping filter used during the modulation of the received waveform.

datatype_icon

MSK MLSE settings

MSK MLSE settings.

datatype_icon

traceback depth

Number of trellis stages to trace back during the Viterbi decoding process. The output bit sequence is delayed, in time, by this amount with respect to the incoming waveform.

Default: 15

datatype_icon

block size

Length, in symbols, of a block of the received waveform, used during block-wise processing. At the beginning of each block, the node resets the Viterbi decoding process. Each block overlaps with the previous block for a number of symbols equal to traceback depth. To enable block-wise processing, set this value to a positive integer greater than the traceback depth.

Default: -1

datatype_icon

error in

Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

Default: no error

datatype_icon

reset?

A Boolean that determines whether the node continues demodulating using the previous iteration states.

TRUE Restarts the demodulator. The node resets on the first call and when reset? is set to TRUE.
FALSE Continues demodulating using the previous iteration states.

Default: TRUE

datatype_icon

output bit stream

The demapped information bit stream.

datatype_icon

error out

Error information. The node produces this output according to standard error behavior.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported


Recently Viewed Topics