Specifies a real-valued waveform, divides it into segments, and displays those segments as plots on a waveform graph. This node determines the segment length based on the symbol rate and eye length parameters.
Modulated data for plotting as an eye diagram.
The desired symbol rate, in hertz (Hz).
Number of symbol periods on the horizontal scale of the eye diagram.
Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.
Default: no error
An array of waveform segments for eye diagram display. Each segment has a time length of (eye length × symbol period) seconds. Wire this parameter directly to a waveform graph.
Trigger (start) time of the Y array.
Time interval between data values in the Y array.
The complex-valued signal-only baseband modulated waveform. The real and imaginary parts of this complex data array correspond to the in-phase (I) and quadrature-phase (Q) data, respectively.
Error information. The node produces this output according to standard error behavior.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported