Table Of Contents

ni579x Synchronization Registers (Clock-Driven Logic)

Last Modified: September 10, 2016

Sets/gets the configuration values for the Synchronization library by connecting to the Register Bus.

connector_pane_image
datatype_icon

register instruction

Specifies a read or write register instruction. This parameter is usually obtained from the register instruction parameter of the Process node in the Register Bus FPGA library. The source of this parameter defines the instances of the Register Bus library to which the Config library instance is wired, and is communicated from the host.

datatype_icon

sync.resources

Identifies the Synchronization instance. Sync.resources is obtained from ni579x Create.

datatype_icon

read completion

Indicates whether the register read operation is complete, and returns the data from the register read. Wire this parameter through either a shift register or a feedback node back to the read completion parameter on the Process node of the Register Bus.

datatype_icon

ready for input

A Boolean that indicates whether this node is ready to write new data to the FIFO in the next clock cycle.

TRUE Indicates that this node is ready to write new data to the FIFO.
FALSE Indicates that this node is not ready to write new data to the FIFO.

Where This Node Can Run:

Desktop OS: none

FPGA: All devices


Recently Viewed Topics