Table Of Contents

ni579x Load Characterization Data (Single Channel) (G Dataflow)

Last Modified: January 9, 2017

Reads characterization data from the on-device EEPROM and returns headers and characterization data for the specified channel.

connector_pane_image
datatype_icon

Register Bus

Register Bus object created by ni579x Open and used as the session handle for the NI-579x Configuration nodes.

datatype_icon

scope

The channel to read characterization data for. Valid values are rx and tx.

datatype_icon

start address

The start offset of the data in the EEPROM.

datatype_icon

EEPROM Data Section

The EEPROM can contain characterization data measured and calculated by the manufacturer (Factory Data), as well as data measured and calculated by the user (User Data).

datatype_icon

Error In

Error conditions that occur before this node runs. Use this information to decide whether to bypass any functionality if this node receives errors from other nodes.

datatype_icon

Register Bus (out)

The Register Bus object created by ni579x Open and used as the session handle for the NI-579x Configuration nodes.

datatype_icon

EEPROM Header

Header information for the entire EEPROM.

datatype_icon

EEPROM Calibration Header

Header information describing the calibration sections.

datatype_icon

Device Data Header

Header information describing the device characterization data sections.

datatype_icon

Characterization Data

Characterization data for the specified channel.

datatype_icon

Error Out

Information about errors or warnings that occurred during or before the execution of this node.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported


Recently Viewed Topics