Configures the mixer (RF upconverter/downconverter) by enabling the LO, setting the LO frequency, configuring the LO filter, and making any necessary routes.
Register Bus object created by ni579x Open and used as the session handle for the NI-579x Configuration nodes.
Frequency to tune the LO. If you are using an external LO source, this parameter specifies the frequency of the incoming LO.
Source of the local oscillator used by the specified mixer. Specify LO1 for the internal LO. Specify LO In to use an external LO source.
Mixer to configure. Valid values are rx and tx.
Error conditions that occur before this node runs. Use this information to decide whether to bypass any functionality if this node receives errors from other nodes.
The Register Bus object created by ni579x Open and used as the session handle for the NI-579x Configuration nodes.
Actual frequency used to tune the LO.
Information about errors or warnings that occurred during or before the execution of this node.
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported