Table Of Contents

Configuration Nodes (G Dataflow)

Last Modified: September 9, 2016

node_icon
Opens a session to the NI-579x Configuration nodes, creates a session to the Register Bus nodes, and initializes the CLIP.
node_icon
Configures the mixer (RF upconverter/downconverter) by enabling the LO, setting the LO frequency, configuring the LO filter, and making any necessary routes.
node_icon
Configures the specified reference level.
node_icon
Configures the specified output power.
node_icon
Closes the session to the NI-579x Configuration nodes.
node_icon
Routes a signal in the adapter module from the specified source to the specified destination terminal.

Recently Viewed Topics