Table Of Contents

NI 5792 Pinout

Version:
    Last Modified: May 17, 2017

    Table 1. NI 5792 Front Panel Connectors
    Device Front Panel Connector Signal Description
    RX IN Receive channel input, +20 dBm maximum
    LO OUT Local oscillator output, +12 dBm maximum, +0 dBm nominal
    CLK IN Reference Clock input, 50 Ω single-ended, +20 dBm maximum
    CLK OUT Exported clock output, DC-coupled, 0 V to 2 V
    LO IN Local oscillator input, +20 dBm maximum
    AUX I/O Digital I/O and PFI connector
    spd-note-caution
    Caution  

    To avoid permanent damage to the NI 5792, disconnect all signals connected to the NI 5792 before powering down the module, and connect signals only after the adapter module has been powered on by the FlexRIO FPGA module or Controller for FlexRIO.

    spd-note-caution
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI 5792 can damage the device and the chassis. NI is not liable for any damage resulting from such connections.


    Recently Viewed Topics