Table Of Contents

User Command Reference

Last Modified: May 17, 2017

User Setting User Command User Data 0 Value User Data 1 Value User Return Value
Clock Settings 0 0 = Internal Sample Clock

1 = Internal Sample Clock locked to an external Reference Clock through the CLK IN connector

2 = External Sample Clock through the CLK IN connector (disables the CLK OUT connector)

3 = Internal Sample Clock locked to an external Reference Clock through Sync Clock

4 = External Sample Clock through the Sync Clock

Default: 0 = 500 MHz DAC output clock, 1 GHz timebase, no interpolation.

Refer to the User Data Clock Settings table for more information.

N/A
Read User EEPROM 6 EEPROM address to read data. N/A Read data.
Write User EEPROM 7 EEPROM address to write data. Write data. N/A
Reinitialize 0xFF N/A N/A N/A

Recently Viewed Topics