Table Of Contents

NI 5771 Pinout

Version:
    Last Modified: May 17, 2017

    Device Front Panel [1] Connector Signal Description
    CLK IN External clock input, 50 Ω, single-ended (SE)
    CLK OUT Exported clock output
    REF IN Reference clock input, 50 Ω, SE
    AI 0 Analog input channel 0, 50 Ω, SE
    AI 1 Analog input channel 1, 50 Ω, SE
    TRIG Trigger input and output channel
    AUX I/O Digital I/O and PFI connector
    spd-note-caution
    Caution  

    To avoid permanent damage to the NI 5771, disconnect all signals connected to the NI 5771 before powering down the module, and connect signals only after the adapter module has been powered on by the FlexRIO FPGA module or Controller for FlexRIO.

    spd-note-caution
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI 5771 can damage the device and the chassis. NI is not liable for any damage resulting from such connections.

    • 1 Disconnect or disable any external clock or digital connections to the NI 5771 front panel. Applying external signals while the device is powered off may cause damage.

    Recently Viewed Topics