Opens a session to the USRP RIO design library, creates the necessary connections to the hardware, and initializes the device.
Channel to operate on. Valid options are rx/RF 0, rx/RF 1, tx/RF 0, and tx/RF 1.
The reference to the FPGA bitfile on the device.
The reference source to use for the clocks of the device. The reference frequency must be 10 MHz.
Turns on the power for the GPSDO.
How long, in seconds, to keep retrying before giving up.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default: no error
The node produces this output according to standard error behavior.
The niUsrpRio session used in all subsequent USRP RIO host nodes.
Installed By: LabVIEW Communications System Design Suite (introduced in 1.1)
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported