Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual

Configures the clocks and clock sources for the device.

connector_pane_image
datatype_icon

scope

Channel to operate on. Valid options are rx/RF 0, rx/RF 1, tx/RF 0, and tx/RF 1.

datatype_icon

Reference Frequency Source

The reference source to use for the clocks of the device. The reference frequency must be 10 MHz.

datatype_icon

GPSDO Power Enable

Turns on the power for the GPSDO.

datatype_icon

timeout

How long, in seconds, to keep retrying before giving up.

datatype_icon

Error Out

Error or warning information out of a node to be used by other nodes.

datatype_icon

niUsrpRio session (out)

The niUsrpRio session used in all subsequent USRP RIO host nodes.

datatype_icon

niUsrpRio session

Object created by the Open node and used as the session handle for the USRP RIO nodes.

datatype_icon

Error In

Error information wired from nodes previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other nodes.