Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    Reads data from a sound input device. You must use Sound Input Configure to configure the device.

    You must have DirectX 8.0 or later to use this node.

    connector_pane_image
    datatype_icon

    number of samples per channel

    Number of samples per channel in the buffer. Use a large number of samples for continuous operations. Use a smaller number of samples if you want to use less memory.

    datatype_icon

    task ID

    The sound operation from the configured device you want to manipulate or input. You generate task ID with Sound Output Configure.

    datatype_icon

    error in

    Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

    Default: no error

    datatype_icon

    timeout

    Time, in seconds, that the node waits for the sound operation to complete. This node returns an error if the time elapses. If you set timeout to -1, the node waits indefinitely.

    Default: 10

    datatype_icon

    task ID out

    The manipulated sound operation originally passed to the task ID parameter.

    datatype_icon

    data

    Any sound data from the file. For multi-channel sound data, data is an array of waveforms where each element of the array is a single channel.

    datatype_icon

    error out

    Error information. The node produces this output according to standard error behavior.