Decodes a Reed-Solomon (RS) encoded symbol stream in normal format.
RS codes are specialized Bose-Chaudhari-Hocquenghem (BCH) codes in which the code elements are drawn from the Galois field, GF(2m). RS codes are extremely powerful at burst error correction. The operations involved in Reed-Solomon encoding and decoding are performed in the GF(2m). The RS encoder operates on code words that are symbols or groups of bits. The parameters code word length (n), symbols and data word length (k), symbols are specified in terms of symbols. Each symbol represents a group of Log2(n+1) bits.
The normal RS (n,k,t) code consists of values of n of the form n = 2 m -1, where valid values of m are 2 to 16, inclusive. For example, set n = 255, k = 233 to produce a RS (255,233,11) code. This code has an error-correcting capacity of 11 RS symbols.
The array of integer symbols to be decoded using the Reed-Solomon (RS) decoding scheme. Use the RS symbol encoder nodes to generate the integer symbols required for this parameter.
The RS decoder is a block decoder, which means that it operates on a block of n integers. To ensure that the output symbols stream corresponds to the entire input symbols array, set the length L of input symbols to be an integer multiple of n symbols. If the length L is not a multiple of n symbols, the last L modulo n symbols are buffered inside the decoder. These symbols are added to the incoming input symbols stream at the beginning of the next iteration if reset? is set to FALSE.
code word length (n), symbols
The length of the Reed-Solomon (RS) code word. Each RS symbol represents log 2 (n+1) bits.
data word length (k), symbols
The length of the Reed-Solomon (RS) data word. Each RS symbol represents log 2 (n+1) bits.
The modulation session for configuring selected properties of the Modulation nodes. Use this parameter to configure the advanced properties in the MT RS Symbol Encoder nodes. If MT RS Symbol Encoder is called with an uninitialized modulation session, the node returns an error.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default: no error
A Boolean that determines whether the internal state of the decoder is cleared.
||Clears any buffered bits from previous iterations. Also initializes the Galois field structure corresponding to the Reed-Solomon n, k values.
||Continues decoding from the previous iteration. Any buffered bits from the previous iteration are added to the beginning of the input bit stream prior to decoding.
The decoded integer symbol stream. Wire this parameter to MT UnPack Bits to recover the message bits that comprise the transmitted message data.