MT Rayleigh Selective Fading Profile (Gans)

The number of paths in the simulated multipath channel. A fading profile is generated for each of these paths.

Default: 1

The number of complex-valued fading profile samples (having Rayleigh-distributed envelopes) to generate.

Default: 1000

The system sample rate, in hertz (Hz). This rate is the product of the symbol rate × samples per symbol.

Default: 1

The desired input Doppler spread f _m of the channel, in hertz (Hz).

This parameter denotes the measure of the spectral broadening caused by the time rate of change of the channel. Doppler spread is defined as the range of frequencies over which the received Doppler spectrum is essentially nonzero. When a pure sine tone at frequency f _c is transmitted, the received signal spectrum, called the Doppler spectrum, has components in the range (f _c - f _m ) to (f _c + f _m ). The Doppler spread is related to the mobile velocity v, carrier frequency f _c , and the speed of light c by the relation f _m = v f _c /c.

Default: 0.01

The initial state for generating the fading profile. If seed in is set to -1, the generated fading profile is randomly chosen during every call when reset? is set to TRUE. Otherwise, the generated fading profile returns the same set of fading coefficients when reset? is set to TRUE.

Default: -1

Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.

Default: no error

The desired variance of the complex-valued Rayleigh distributed fading profile.

Default: 1

A Boolean that determines whether the fading profile generation is reset on subsequent calls to this node.

Default: TRUE

A two-dimensional array of complex-valued coefficients. The number of rows corresponds to the number of paths in the channel, and the number of columns is equal to the profile length. Wire this parameter to MT Apply Fading Profile to apply this fading profile to a baseband I/Q signal.

The internal state of the node at the end of generation of the fading profile for the current iteration. When reset? is set to FALSE, this state is used to continue the fading profile generation at the beginning of the next iteration.

Error information. The node produces this output according to standard error behavior.