Performs deinterleaving by writing the input data into an m(rows) × n(columns) matrix, column by column, and then reading the data out row by row when the matrix is full. Typically, MT Block Interleave (Matrix) and MT Block DeInterleave (Matrix) are used together.
The input data to be deinterleaved. Data is processed in blocks of mn, where m is the number of rows and n is the number of columns. If the number of data samples is less than block size mn, the block interleaver does not generate any data if the node is run once. If the data samples are continuously fed in and if the number of data samples is greater than but not a multiple of mn, the block interleaver buffers the remaining samples for use in the next iteration. For example, if m = 3, n = 4, and 27 data samples are specified, this node interleaves two blocks (2×12=24) of data and buffers 3 samples (27-24=3) for use in the next iteration. Data is read in by row and read out by column.
number of rows
The number of rows of the block deinterleaver.
number of columns
The number of columns of the block deinterleaver.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default: no error
A Boolean that determines how this node handles buffered data.
||Clears the buffered data, checks the input parameters on a first call, and reflects any change in the input parameter values during subsequent iterations.
||Adds the buffered data to the beginning of data from next iteration, in continuous operations.
The output of the block deinterleave operation. The data generated of a block deinterleaver is the same as the data passed into to the block interleaver.