Locates the first occurrence of the ideal symbol timing instant in the matched filtered input phase waveform, then applies phase-continuous resampling to align the first sample of the input phase waveform to the ideal symbol timing instant for an FSK modulation scheme. The returned waveform is symbol-time aligned such that its first sample corresponds to the optimal (ideal) symbol instant.
The continuous-time samples of the modulated complex baseband waveform data. Wire the output complex waveform returned from MT Apply Matched Filter to this parameter.
For this node to function properly, you have to meet the following requirements:
Trigger (start) time of the Y array.
Default: 0.0
Time interval between data points in the Y array.
Default: 1.0
The matched-filtered phase of the modulated baseband waveform.
An ordered array containing coefficients for the matched filter that has been applied to the input complex waveform. Wire the matched filter coefficients parameter of MT Generate Filter Coefficients to this parameter. Ensure that the value of the samples per symbol parameter in this node matches the matched samples per symbol value used to generate these filter coefficients.
Number of samples per information symbol in the input complex waveform.
Default: 16
Error conditions that occur before this node runs. The node responds to this input according to standard error behavior.
Default: no error
A Boolean that determines whether the node continues to align the input complex waveform to ideal symbol timing instants using the previous iteration states.
TRUE | Resets the node. The node resets on the first call and when reset? is set to TRUE. |
FALSE | Continues to align the input complex waveform to ideal symbol timing instants using the previous iteration states. |
Default: TRUE
The symbol-time-aligned phase of the FSK-modulated baseband waveform. Wire this parameter to MT Decimate Oversampled Waveform followed by MT Map Symbols to Bits to obtain the recovered bits corresponding to the modulated waveform.
Trigger (start) time of the Y array.
Default: 0
Time interval between data points in the Y array. The reciprocal of this value is equal to the system sample rate.
Default: 1.0
The symbol-time aligned phase of the modulated waveform.
Location of the ideal symbol timing instant, in samples, relative to the beginning of the input complex waveform. This offset was applied to the output complex waveform. Multiply this value by the dt element of the input complex waveform to calculate the location of the ideal symbol timing instant in seconds.
Error information. The node produces this output according to standard error behavior.
Installed By: LabVIEW Communications System Design Suite (introduced in 1.0)
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
This site uses cookies to offer you a better browsing experience. Learn more about our privacy policy.