Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual

Computes the norm square of a vector.

connector_pane_image
datatype_icon

x

The matrix to manipulate.

datatype_icon

input valid

A Boolean that describes whether the next data point has arrived for processing. Wire the output valid output of an upstream node to this input to transfer data from the upstream node to this node.

TRUE The next data point has arrived for processing.
FALSE The next data point has not arrived for processing.
datatype_icon

ready for output

A Boolean that defines whether downstream nodes are ready for this node to return a new value. Use a Feedback Node to wire the ready for input output of a downstream node to this input of the current node.

TRUE Downstream nodes are ready for this node to return a new value.
FALSE Downstream nodes are not ready for this node to return a new value.
Note  

If this terminal is FALSE during a given cycle, the output valid terminal returns FALSE during that cycle.

Default: TRUE

datatype_icon

norm square

The norm square of the input vector.

datatype_icon

operation overflow

A Boolean that indicates whether the theoretical computed value exceeds the valid range of the output data type.

TRUE The theoretical computed value exceeds the valid range of the output data type.
FALSE The theoretical computed value does not exceed the valid range of the output data type.
datatype_icon

output valid

A Boolean that indicates whether this node has computed a result that downstream nodes can use. Wire this output to the input valid input of a downstream node to transfer data from the node to the downstream node.

TRUE The node has computed a result that downstream nodes can use.
FALSE The node has not computed a result that downstream nodes can use.
datatype_icon

ready for input

A Boolean that determines whether this node is ready to accept new input data. Use a Feedback Node to wire this output to the ready for output input of an upstream node.

TRUE This node is ready to accept new input data.
FALSE This node is not ready to accept new input data.
Note  

If this terminal returns FALSE during a given cycle, LabVIEW discards any data that other nodes send to this node during the following cycle. LabVIEW discards this data even if the input valid terminal is TRUE during the following cycle.