Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    The following figure shows the location and pinouts for the DVI connector on the NI PXIe-8133. The following table lists and describes the DVI connector signals.

    Figure 1. DVI Connector Location and Pinout
    Table 1. DVI-I Connector Signals
    Pin Signal Name
    1 TMDS Data2–
    2 TMDS Data2+
    3 TMDS Data2/4 Shield
    4 Reserved
    5 Reserved
    6 DDC Clock [SCL]
    7 DDC Data [SDA]
    8 Analog vertical sync
    9 TMDS Data1–
    10 TMDS Data1+
    11 TMDS Data1/3 Shield
    12 Reserved
    13 Reserved
    14 +5 V Power
    15 Ground (for +5 V)
    16 Hot Plug Detect
    17 TMDS Data0–
    18 TMDSData0+
    19 TMDS Data0/5 Shield
    20 Reserved
    21 Reserved
    22 TMDS Clock Shield
    23 TMDS Clock +
    24 TMDS Clock –
    C1 Analog Red
    C2 Analog Green
    C3 Analog Blue
    C4 Analog Horizontal Sync
    C5 Analog GND Return: (analog R, G, B)