Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:
    Note  

    All values are nominal.

    Table 1. TX LO Residual Power
    Frequency Temperature 23 °C ±5 °C (dBm)
    >200 MHz to 1 GHz -48
    >1 GHz to 2 GHz -48
    >2 GHz to 3 GHz -48
    >3 GHz to 4.4 GHz -45
    Note  

    This specification holds at the center frequency of the transmitted instantaneous bandwidth, 100 MHz maximum after the device performs a recent single point I/Q impairment self-correction. The measurement is performed with 0 dB of TX attenuation.