The following table shows the front panel connector and signal descriptions for the NI 5793.
To avoid permanent damage to the NI 5793, disconnect all signals connected to the NI 5793 before powering down the module, and connect signals only after the adapter module has been powered on by the NI FlexRIO FPGA module.
Connections that exceed any of the maximum ratings of any connector on the NI 5793R can damage the device and the chassis. NI is not liable for any damage resulting from such connections.
Table 1. NI 5793 Front Panel Connectors
|Device Front Panel
||Local oscillator output, +12 dBm maximum, +0 dBm
||Reference Clock input, 50 Ω single-ended, +20 dBm maximum
||Exported clock output, DC-coupled, 0 V to 2V
||Local oscillator input, +20 dBm maximum
||Transmit channel, +20 dBm maximum
||Refer to the table below for signal list and descriptions.
For more detailed information about the NI 5793 front panel connectors, refer to the NI 5793R Specifications.