Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:
    Note  

    All values are nominal.

    Table 1. Dynamic Range at 900 MHz
    Reference Level (dBm) IP3 (dBm) Noise Floor (dBm/Hz) Dynamic Range (dB)
    -5 25 -138 109
    -15 15 -148 109
    -25 5 -158 109
    -35 -4 -167 109
    Note  

    The signal level of each tone is set to 6 dB less than the reference level to prevent overload. Dynamic range = 2/3 × (IP3 – Noise Floor)

    Table 2. Dynamic Range at 2,400 MHz
    Reference Level (dBm) IP3 (dBm) Noise Floor (dBm/Hz) Dynamic Range (dB)
    -5 21 -142 109
    -15 12 -151 109
    -25 2 -161 109
    -35 -3 -166 109
    Note  

    The signal level of each tone is set to 6 dB less than the reference level to prevent overload. Dynamic range = 2/3 × (IP3 – Noise Floor)