Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:
    Note  

    All values are nominal.

    Table 1. Dynamic Range at 900 MHz
    Reference Level (dBm) IP3 (dBm) Noise Floor (dBm/Hz) Dynamic Range (dB)
    5 24 -135 106
    -5 14 -145 106
    -15 4 -155 106
    -25 0 -163 109
    Note  

    The signal level of each tone is set to 6 dB less than the reference level to prevent overload. Dynamic range = 2/3 × (IMD3Noise Floor)

    Table 2. Dynamic Range at 2,400 MHz
    Reference Level (dBm) IP3 (dBm) Noise Floor (dBm/Hz) Dynamic Range (dB)
    5 22 -135 105
    -5 12 -145 105
    -15 3 -155 105
    -25 1 -163 109
    Note  

    The signal level of each tone is set to 6 dB less than the reference level to prevent overload. Dynamic range = 2/3 × (IP3 – Noise Floor)