Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    The following table shows the front panel connector and signal descriptions for the NI 5782.

    Caution  

    To avoid permanent damage to the NI 5782, disconnect all signals connected to the NI 5782 before powering down the module, and connect signals only after the adapter module has been powered on by the NI FlexRIO FPGA module.

    Table 1. NI 5782 Front Panel Connectors
    Device Front Panel Connector Signal Description
    AUX I/O Refer to Table 3 for the signal list and descriptions.
    CLK IN 50 Ω single-ended (SE) external Reference or Sample Clock input.
    TRIG Trigger input channel.
    AI 0 50 Ω SE analog input (AI) channel 0.
    AI 1 50 Ω SE AI channel 1.
    AI 0 50 Ω SE analog output (AO) channel 0.
    AI 1 50 Ω SE AO channel 1.
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI 5782R can damage the device and the chassis. NI is not liable for any damage resulting from such connections.

    For more detailed information about the NI 5782 front panel connectors, refer to the NI 5782R Specifications.