Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual

The NI 5772 allows you to configure the clock, ADC, sampling, and other settings with the User Command, User Data 0, and User Data 1 signals.

User Setting User Command User Data 0 Value User Data 1 Value User Return Value
Clock Selection Enumeration 0 0 = Internal Sample clock

1 = Internal Sample clock locked to an external Reference clock through the CLK IN connector

2 = External Sample clock through the CLK IN connector (disables the CLK OUT connector)

3 = Internal Sample clock locked to an external Reference clock through Sync Clock

N/A N/A
ADC Self-Calibration 1 Performs a self-calibration on the ADC12D800RF. N/A N/A
Set TIS Mode 4 0 = TIS mode disabled

1 = TIS mode (Channel 0 only) enabled

2 = TIS mode (Channel 1 only) enabled

3 = Dual-TIS Mode (Channels 0 and 1) enabled

Note  

DC-coupled modules do not support Dual-TIS Mode.

N/A N/A
Count Metastability 5 Issues 1,000 timestamp measurements and returns the number of timestamps that are metastable. N/A N/A
Set Timestamp Source 6 Selects the source of the timestamp measurement. N/A N/A
Read Revision 240 Reads the CLIP revision number. N/A N/A
Read Oldest Compatible Revision 242 Reads the CLIP Oldest Compatible Revision number. N/A N/A
Reinitialize 255 Configures the NI 5772 to its default power-on configuration. N/A N/A