Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    All specifications were tested in TIS Disabled mode unless otherwise specified.

    DC offset
    AC-coupled ±4.3 mV
    DC-coupled ±6.5 mV
    Full-scale input +10 dBm (2 Vpk-pk) or +16 dBm (4 Vpk-pk) [1]
    Gain error
    AC-coupled ±2.0% full scale range (FSR)
    DC-coupled ±6.5% full scale range (FSR)
    Table 1. Analog Input Jitter
    Integration Range Internal Free-Running Internal Locked to IOModSyncCLK
    10 Hz to 10 MHz 580 fs rms 770 fs rms
    100 Hz to 10 MHz 95 fs rms 175 fs rms
    10 kHz to 10 MHz 85 fs rms 85 fs rms
    Table 2. Average Noise Density
    nV/√Hz dBm/Hz dBFS/Hz
    AC-coupled 30 -137.5 -147.5
    DC-coupled 33 -136.6 -146.6
    Table 3. AC Low Cut-Off Frequency (Referenced to Amplitude at 10 MHz)
    -3 dB -1 dB
    AC-coupled 110 kHz 240 kHz
    DC-coupled 0 kHz 0 kHz
    Table 4. Bandwidth And Spectral Performance Summary
    Mode Coupling Bandwidth (-3 dB) Bandwidth (-1 dB) SNR (dB)¹ SFDR (dBc)¹ THD (dBc)¹ ENOB (bits)¹
    TIS Disabled (default) AC-coupled 2.27 GHz 780 MHz 58 -65 -63 9.2
    DC-coupled 358 MHz 320 MHz 57 -65 -64 9.1
    TIS Enabled, Muxed to CH 0 AC-coupled 780 MHz 450 MHz 57 -63 -63 9.0
    DC-coupled 356 MHz 312 MHz 57 -63 -65 9.0
    TIS Enabled, Muxed to CH 1 AC-coupled 780 MHz 450 MHz 57 -63 -63 9.0
    DC-coupled 356 MHz 312 MHz 57 -63 -65 9.0
    TIS Enabled, Non-Muxed AC-coupled 2.0 GHz 690 MHz 56 -60 -63 8.9
    DC-coupled N/A N/A N/A N/A N/A N/A
    ¹Measured using a -1 dBFS signal at 187 MHz.
    • 1 Available in the AC-coupled version and in TIS Enabled, Non-Multiplexed sampling mode only.