Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    Analog Input Impedance

    Figure 1. Analog Input Return Loss (Multiple Channels Overlaid)
    Figure 2. Analog Input VSWR (Multiple Channels Overlaid)

    Frequency Response

    Note  

    Referenced at 10 MHz using +9 dBm.

    Figure 3. AC Low Frequency Response (Referenced to Amplitude at 10 MHz)
    Figure 4. High Frequency Response (Referenced to Amplitude at 10 MHz)
    Figure 5. DC Bandwidth (Referenced to Amplitude at 10 MHz)
    Figure 6. DC Bandwidth Flatness (Referenced to Amplitude at 10 MHz)

    Spectral Measurements

    Figure 7. Noise Density
    Figure 8. One-Tone Spectral Measurement (TIS Disabled, 187 MHz, -1 dBFS)
    Figure 9. Two-Tone Spectral Measurement (TIS Multiplexed Mode, 182k Samples, 10 Averages)

    Analog Input Total Phase Noise

    Figure 10. Analog Input Total Phase Noise (353 MHz, -1 dBFS carrier)

    *Uses a 10 MHz Wenzel OCXO (P/N: 501-04609A) as the reference signal.

    Crosstalk

    Figure 11. AI Crosstalk (Aggressor at -1 dBFS, Victim Terminated to 50 Ω) [1]
    Figure 12. AI Crosstalk (Aggressor at -1 dBFS, Victim Terminated to 50 Ω)
    • 1 AC-coupled version only.