Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:

    Frequency Response [1]

    Figure 1. Low Frequency Response (Average of Multiple Channels)
    Figure 2. Frequency Response (Average of Multiple Channels)
    Figure 3. Frequency Response, +4 dB to -6 dB (Average of Multiple Channels)

    Spectral Measurements

    Figure 4. Low Power Source Spectral Measurements (262,144 Point FFT, 10 Average RMS, -1 dBFS, 175 MHz)
    Figure 5. Spectral Measurements (131,072 Point FFT, 10 Average RMS, -1 dBFS, 175 MHz)

    Analog Input Total Phase Noise

    Figure 6. AI Phase Noise (100 MHz Input, PLL Locked to PXI_CLK10, 1.2 pS RMS Jitter, -1 dBFS)
    Table 1. Analog Input Total Phase Noise
    Offset Frequency Phase Noise (dBc/Hz)
    100 Hz -98.9
    1 kHz -112.8
    10 kHz -118.2
    100 kHz -126.9
    1 MHz -127.3
    • 1 Referenced at 10 MHz