Home > Support > NI Product Manuals > LabVIEW Communications System Design Suite 1.0 Manual
Version:
    ADC DC offset -11 mV ± 1.6 mV
    Full-scale (FS) input 1.35 Vpk-pk
    Gain error ±1.6% (at DC)
    Average noise density [1]
    nV/√Hz 64.8
    dBm/Hz 130.7
    dBFS/Hz 137.3
    Passband (DC-coupling), real-time sampling mode
    Low cut-off frequency (-3 dB) 0 Hz
    High cut-off frequency (-3 dB) 900 MHz
    Signal-to-noise ratio (SNR) [2] 46.2 dB
    Total harmonic distortion (THD) -55.2 dBc
    Spurious-free dynamic range (SFDR) 56.4 dBc
    Frequency-adjusted DAC range ±110 ppm
    Sample rate 1.5 GHz
    • 1 Average noise density was measured with the following setup conditions: 375 MHz; 262,144 samples; 7-term Blackman–Harris window; bin = 15.059 kHz, 0 dBFS = 6.62 dBm into 50 Ω. (Full scale = 1.35 Vpk-pk).
    • 2 Measured at -1 dBFS with an input frequency of 175 MHz.