Table Of Contents

IVI Upconverter RF Output Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Configures the attenuator hold enabled setting.
    node_icon
    Configures whether or not the active RF output is enabled.
    node_icon
    Configures the active IF input frequency.
    node_icon
    Configures the amount of gain (or attenuation) to apply to the active RF output of the upconverter.
    node_icon
    Configures the power level that should appear at the active RF output of the upconverter.
    node_icon
    Configures the output trigger used to indicate when the active RF output has settled to a point suitable for processing by downstream components.
    node_icon
    Returns the specific driver defined RF Output name that corresponds to the one-based index that the user specifies. If the driver defines a qualified RF Output name, this node returns the qualified name. If the value that the user passes for the index parameter is less than one or greater than the value of the IviUpconverter RF Output Count property, the node returns an empty string in the name parameter and returns the Invalid Value error.
    node_icon
    Selects one of the available RF outputs, and makes it the active RF output.

    Recently Viewed Topics