Table Of Contents

IviUpconverter Configure Reference Oscillator [RO] (G Dataflow)

Version:
    Last Modified: October 24, 2017

    Configures the upconverter's reference oscillator.

    connector_pane_image
    datatype_icon

    instrument handle

    The instrument handle that you obtain from the IviUpconverter Initialize or IviUpconverter Initialize With Options Node. The handle identifies a particular instrument session.

    Default: None

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    reference oscillator source

    Pass the reference oscillator source used to generate the precise RF output frequency.

    The driver uses this value to set the IviUpconverter Reference Oscillator Source [RO] property. Valid Values:

    • IVIUPCONVERTER_VAL_REFERENCE_OSCILLATOR_SOURCE_INTERNAL - Internal reference oscillator
    • IVIUPCONVERTER_VAL_REFERENCE_OSCILLATOR_SOURCE_EXTERNAL - External reference oscillator.

    Default Value: IVIUPCONVERTER_VAL_REFERENCE_OSCILLATOR_SOURCE_INTERNAL

    datatype_icon

    external frequency

    Pass the frequency of the external signal that is used as reference for internal RF frequency generation.

    The driver uses this value to set the IviUpconverter Reference Oscillator External Frequency [RO] property.

    Default Value: 10.0e6 Hz

    spd-note-note
    Note  

    This value is valid only when IviUpconverter Reference Oscillator Source [RO] is External.

    datatype_icon

    instrument handle out

    The instrument handle that you obtain from the IviUpconverter Initialize or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics