Table Of Contents

IviUpconverter Configure RF Output Ready Trigger [ORT] (G Dataflow)

Version:
    Last Modified: October 24, 2017

    Configures the output trigger used to indicate when the active RF output has settled to a point suitable for processing by downstream components.

    connector_pane_image
    datatype_icon

    instrument handle

    The instrument handle that you obtain from the IviUpconverter Initialize or IviUpconverter Initialize With Options Node. The handle identifies a particular instrument session.

    Default: None

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    RF output ready trigger (None)

    Pass where a trigger should be fired when the active RF output has settled to a point that is suitable for processing by downstream components. The driver uses this value to set the IviUpconverter RF Output Ready Trigger [ORT] property. Valid Values: IVIUPCONVERTER_VAL_TRIGGER_SOURCE_NONE - No trigger source. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_IMMEDIATE - Trigger Immediately. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_EXTERNAL - External trigger source. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_INTERNAL - Internal trigger source. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_SOFTWARE - Software trigger. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN0 - LAN0 (LXI defined "LAN0" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN1 - LAN1 (LXI defined "LAN1" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN2 - LAN2 (LXI defined "LAN2" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN3 - LAN3 (LXI defined "LAN3" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN4 - LAN4 (LXI defined "LAN4" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN5 - LAN5 (LXI defined "LAN5" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN6 - LAN6 (LXI defined "LAN6" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LAN7 - LAN7 (LXI defined "LAN7" LAN message). IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI0 - LXI Trigger Bus Line 0. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI1 - LXI Trigger Bus Line 1. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI2 - LXI Trigger Bus Line 2. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI3 - LXI Trigger Bus Line 3. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI4 - LXI Trigger Bus Line 4. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI5 - LXI Trigger Bus Line 5. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI6 - LXI Trigger Bus Line 6. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_LXI7 - LXI Trigger Bus Line 7. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL0 - TTL Interface 0. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL1 - TTL Interface 1. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL2 - TTL Interface 2. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL3 - TTL Interface 3. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL4 - TTL Interface 4. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL5 - TTL Interface 5. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL6 - TTL Interface 6. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_TTL7 - TTL Interface 7. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_STAR - PXI Star Interface. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG0 - PXI Trigger Bus Line 0. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG1 - PXI Trigger Bus Line 1. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG2 - PXI Trigger Bus Line 2. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG3 - PXI Trigger Bus Line 3. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG4 - PXI Trigger Bus Line 4. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG5 - PXI Trigger Bus Line 5. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG6 - PXI Trigger Bus Line 6. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG7 - PXI Trigger Bus Line 7. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARA - PXI Express DStar Line A. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARB - PXI Express DStar Line B. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARC - PXI Express DStar Line C. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI0 - RTSI Bus Line 0. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI1 - RTSI Bus Line 1. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI2 - RTSI Bus Line 2. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI3 - RTSI Bus Line 3. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI4 - RTSI Bus Line 4. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI5 - RTSI Bus Line 5. IVIUPCONVERTER_VAL_TRIGGER_SOURCE_RTSI6 - RTSI Bus Line 6. Default Value: IVIUPCONVERTER_VAL_TRIGGER_SOURCE_NONE

    datatype_icon

    instrument handle out

    The instrument handle that you obtain from the IviUpconverter Initialize or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics