Table Of Contents

IVI Spectrum Analyzer Marker Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Enables the active marker on the specified trace.
    node_icon
    Sets the marker frequency counter resolution and turns the marker frequency counter on/off.
    node_icon
    Configures the marker peak excursion and marker threshold values. The marker peak excursion specifies the minimum amplitude variation that can be recognized as a peak or minimum by the marker. The marker threshold specifies a lower bound for ALL marker search nodes.
    node_icon
    Enables signal-tracking. When signal tracking is turned on, the spectrum analyzer centers the signal on which the active marker resides after each sweep.
    node_icon
    Disables all of markers.
    node_icon
    Returns the specific driver defined trace name that corresponds to the one-based index specified by the Index parameter.
    node_icon
    Specifies whether the active marker is a delta marker.
    node_icon
    Specifies the type of marker search and performs the search.
    node_icon
    Moves the active marker to the specified horizontal position.
    node_icon
    Returns the horizontal position and the marker amplitude level of the active marker.
    node_icon
    Queries the read-only IviSpecAn>>Markers>>Marker Type>>Marker Type property.
    node_icon
    Returns the amplitude and position of the reference marker.
    node_icon
    Selects one of the available markers, and makes it the active marker. The active marker must be enabled using the IviSpecAn Configure Marker Enabled [MKR].vi before it can be used for most marker operations.
    node_icon
    Uses the IviSpecAn>>Markers>>Marker Position or IviSpecAn>>Markers>>Marker Amplitude property to configure the spectrum analyzer according to value of the InstrumentSetting parameter.

    Recently Viewed Topics