Table Of Contents

IVI Oscilloscope Utility (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Resets the instrument and applies initial user specified settings from the Logical Name which was used to initialize the session.
    node_icon
    Resets the instrument to a known state and sends initialization commands to the instrument.
    node_icon
    Runs the instrument's self test routine and returns the test result(s).
    node_icon
    Returns the revision numbers of the instrument driver and instrument firmware.
    node_icon
    Invalidates the cached values of all properties for the session.
    node_icon
    Places the instrument in a quiescent state where it has minimal or no impact on the system to which it is connected.
    node_icon
    Reads an error code and a message from the instrument's error queue.
    node_icon
    Converts a status code returned by an instrument driver into a user-readable string.
    node_icon
    After the read and fetch waveform nodes execute, each element in the waveform array contains either a voltage or a value indicating that the oscilloscope could not sample a voltage. This node determines whether a value you pass from the waveform array is invalid.
    node_icon
    Returns the highest-level channel name that corresponds to the specific driver channel string that is in the channel table at an index you specify.
    node_icon
    Obtains the coercion information associated with the IVI session. It retrieves and clears the oldest instance in which the specific driver coerced a value you specified to another value.

    Recently Viewed Topics