Table Of Contents

IVI RF Signal Generator TDMA Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Configures the TDMA clock source.
    node_icon
    Configures the trigger event to occur on the rising or falling edge of the input signal. This setting is used only if IviRFSigGen>>TDMA Base Functionality Extended Properties>>TDMA Trigger Source is set to External.
    node_icon
    Configures the TDMA trigger source for starting or synchronizing the generation of the frames/slots.
    node_icon
    Returns the specific driver defined TDMA frame name that corresponds to the one-based index specified by the Index parameter.
    node_icon
    Returns the specific driver defined TDMA standard name that corresponds to the one-based index specified by the Index parameter. If you pass in a value for the Index parameter that is less than one or greater than the value of the TDMA_STANDARD_COUNT property, the node returns an empty string in the Name parameter and returns the Invalid Value error.
    node_icon
    Specifies the frame used for framed digital modulation. To obtain a list of available TDMA frames, call the IviRFSigGen Get TDMA Frame Name [TDMA] node.
    node_icon
    Specifies the standard used by the instrument. To obtain a list of available standards, call the IviRFSigGen Get TDMA Standard Name [TDMA] node. Many instrument settings are affected by selecting an instrument standard. These settings include: coding, mapping, symbol rate or bit clock frequency, filter together with the associated filter parameters, and FSK deviation or ASK depth (in case of FSK or ASK modulation).

    Recently Viewed Topics