Table Of Contents

IVI RF Signal Generator Sweep Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Configures how the frequency sweep advances.
    node_icon
    Configures the settings that control the step frequencies of the generator's RF output signal. These settings are start and stop frequency, step size, and lin/log scaling. If the stop frequency is less than the start frequency, the frequency decreases during the sweep.
    node_icon
    Configures the center frequency and span for a frequency sweep.
    node_icon
    Configures the start and stop frequencies for a frequency sweep. If the stop frequency is less than the start frequency, the frequency decreases during the sweep.
    node_icon
    Configures the duration of one frequency sweep.
    node_icon
    Configures how the power sweep advances.
    node_icon
    Configures the settings that control the power steps of the generator's RF output signal. These settings are start and stop power and step size. If the stop power is less than the start power, the power decreases in value during the sweep
    node_icon
    Configures the start and stop power for a power sweep. If the stop power is less than the start power, the power decreases in value during the sweep.
    node_icon
    Configures the duration of one power sweep.
    node_icon
    Configures the signal generator sweep mode and trigger source.
    node_icon
    Resets the current frequency step to the frequency step start value.
    node_icon
    Resets the current power step to the power step start value.

    Recently Viewed Topics