Table Of Contents
IVI RF Signal Generator CDMA Nodes (G Dataflow)
Version:
Last Modified: October 23, 2017
Configures the CDMA clock source.
Configures the trigger event to occur on the rising or falling edge of the input signal. This setting is used only if IviRFSigGen>>CDMA Base Functionality Extended Properties>>CDMA Trigger Source is set to External.
Configures the CDMA trigger source for starting or synchronizing the generation of the channel codings.
Returns the specific driver defined CDMA standard name that corresponds to the one-based index specified by the Index parameter.
Returns the specific driver defined CDMA test model name that corresponds to the one-based index specified by the Index parameter. If you pass in a value for the Index parameter that is less than one or greater than the value of the IviRFSigGen>>CDMA Base Functionality Extended Properties>>CDMA Test Model Count property, the node returns an empty string in the Name parameter and returns the Invalid Value error.
Specifies the channel coding used for the digital modulation. To obtain a list of available CDMA test models for channel coding, call the IviRFSigGen Get CDMA Test Model Name [CDMA] node.
Specifies the standard used by the instrument. To obtain a list of available standards, call the IviRFSigGen Get TDMA Standard Name [TDMA] node. Many instrument settings are affected by selecting an instrument standard. These settings include: coding, mapping, symbol rate or bit clock frequency, filter together with the associated filter parameters, and FSK deviation or ASK depth (in case of FSK or ASK modulation).