Table Of Contents

IVI Function Generator Configuration Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Configures the operation mode of the function generator. The operation mode determines how the function generator produces output on a channel. For example, you can select to generate output continuously or to generate a discrete number of waveform cycles based on a trigger event.
    node_icon
    Configures the output mode of the function generator. The output mode determines the kind of waveform the function generator produces. For example, you can select to output a standard waveform, an arbitrary waveform, or a sequence of arbitrary waveforms.
    node_icon
    Configures the function generator's reference clock source. The function generator uses the reference clock to derive frequencies and sample rates when generating output.
    node_icon
    Configures the output impedance for the channel you specify.
    node_icon
    Configures whether the signal the function generator produces appears at the channel's output connector.
    node_icon
    Configures the sample clock source for the function generator.
    node_icon
    Configures whether the sample clock appears at the sample clock output of the generator.
    node_icon
    Configures the properties of the function generator that affect standard waveform generation. These properties are the waveform, amplitude, DC offset, frequency, and start phase.

    Recently Viewed Topics