Table Of Contents

IviDownconverter Configure Frequency Sweep [FSW] (G Dataflow)

Version:
    Last Modified: October 24, 2017

    Selects one of the available RF inputs, and makes it the active RF input.

    connector_pane_image
    datatype_icon

    instrument handle

    The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options Node. The handle identifies a particular instrument session.

    Default: None

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    frequency sweep mode

    Specifies the sweep mode of the RF input signal. The driver uses this value to set the IviDownconverter Frequency Sweep Mode [FSW] property.

    Name Description
    IVIDOWNCONVERTER_VAL_FREQUENCY_SWEEP_MODE_NONE The RF input is a non-swept signal (continuous wave).
    IVIDOWNCONVERTER_VAL_FREQUENCY_SWEEP_MODE_SWEEP Sweeps the RF input signal frequency in analog form (non-stepped).
    IVIDOWNCONVERTER_VAL_FREQUENCY_SWEEP_MODE_STEP Sweeps the RF input signal frequency in steps.
    IVIDOWNCONVERTER_VAL_FREQUENCY_SWEEP_MODE_LIST Uses a list to sweep the RF input signal frequency.

    Default: IVIDOWNCONVERTER_VAL_FREQUENCY_SWEEP_MODE_NONE

    datatype_icon

    trigger source (None)

    Specifies the trigger source to start an LO sweep operation. The driver uses this value to set the IviDownconverter Frequency Sweep Trigger Source [FSW] property.

    Name Description
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_NONE No trigger source.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_IMMEDIATE Trigger immediately.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_EXTERNAL External trigger source.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_INTERNAL Internal trigger source.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_SOFTWARE Software trigger.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN0 LAN0 (LXI defined "LAN0" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN1 LAN1 (LXI defined "LAN1" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN2 LAN2 (LXI defined "LAN2" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN3 LAN3 (LXI defined "LAN3" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN4 LAN4 (LXI defined "LAN4" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN5 LAN5 (LXI defined "LAN5" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN6 LAN6 (LXI defined "LAN6" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LAN7 LAN7 (LXI defined "LAN7" LAN message).
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI0 LXI Trigger Bus Line 0.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI1

    LXI Trigger Bus Line 1.

    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI2 LXI Trigger Bus Line 2.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI3 LXI Trigger Bus Line 3.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI4 LXI Trigger Bus Line 4.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI5 LXI Trigger Bus Line 5.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI6 LXI Trigger Bus Line 6.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_LXI7 LXI Trigger Bus Line 7.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL0 TTL Interface 0.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL1 TTL Interface 1.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL2 TTL Interface 2.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL3 TTL Interface 3.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL4 TTL Interface 4.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL5 TTL Interface 5.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL6 TTL Interface 6.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_TTL7 TTL Interface 7.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_STAR PXI Star Interface.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG0 PXI Trigger Bus Line 0.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG1 PXI Trigger Bus Line 1.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG2 PXI Trigger Bus Line 2.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG3 PXI Trigger Bus Line 3.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG4 PXI Trigger Bus Line 4.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG5 PXI Trigger Bus Line 5.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG6 PXI Trigger Bus Line 6.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXI_TRIG7 PXI Trigger Bus Line 7.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARA PXI Express DStar Line A.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARB PXI Express DStar Line B.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_PXIE_DSTARC PXI Express DStar Line C.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI0 RTSI Bus Line 0.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI1 RTSI Bus Line 1.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI2 RTSI Bus Line 2.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI3 RTSI Bus Line 3.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI4 RTSI Bus Line 4.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI5 RTSI Bus Line 5.
    IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_RTSI6 RTSI Bus Line 6.

    Default: IVIDOWNCONVERTER_VAL_TRIGGER_SOURCE_NONE

    datatype_icon

    instrument handle out

    The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options Nodes. The handle identifies a particular instrument session.

    Default: None

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics