Table Of Contents

IVI Downconverter Action Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Performs calibration on the entire device.
    node_icon
    Queries the instrument to determine whether the instrument is currently in a valid self-calibrated state or whether it needs to be calibrated.
    node_icon
    Queries the instrument to determine the status of all calibration operations initiated by IviDownconverter Calibrate.
    node_icon
    Sends a command to trigger the downconverter. Call this node if you pass Software Trigger for the trigger source parameter of IviDownconverter Configure Frequency Sweep.
    node_icon
    Waits until the frequency sweep is complete. If no frequency sweep is currently running, this node returns immediately. If the sweep does not complete within the maximum time designated, the node returns the Max Time Exceeded error.
    node_icon
    Waits until all of the signals flowing through the downconverter have settled. If the signals do not settle within the maximum time designated, the node returns the Max Time Exceeded error.

    Recently Viewed Topics