Table Of Contents

IVI Digital Multimeter Utility (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Resets the instrument to a known state and sends initialization commands to the instrument.
    node_icon
    Resets the instrument and applies initial user specified settings from the Logical Name which was used to initialize the session.
    node_icon
    Runs the instrument's self test routine and returns the test result(s).
    node_icon
    Returns the revision numbers of the instrument driver and instrument firmware.
    node_icon
    Invalidates the cached values of all properties for the session.
    node_icon
    Places the instrument in a quiescent state where it has minimal or no impact on the system to which it is connected.
    node_icon
    Reads an error code and a message from the instrument's error queue.
    node_icon
    Converts a status code returned by an instrument driver into a user-readable string.
    node_icon
    Obtains the coercion information associated with the IVI session. It retrieves and clears the oldest instance in which the specific driver coerced a value you specified to another value. If you set the IviDmm>>Inherent IVI Settings>>User Options>>Record Value Coercions property to TRUE, the specific driver keeps a list of all coercions it makes on ViInt32 or ViReal64 values you pass to instrument driver nodes. You use this node to retrieve information from that list. The node returns an empty string in the Coercion Record parameter if no coercion records remain for the session.
    node_icon
    Get interchangeability information about your digital multimeter.

    Recently Viewed Topics