Table Of Contents

IVI Digitizer Arm Nodes (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Sets the edge arming properties. An edge occurs when the arm signal that the end-user specifies in the Arm Source input passes through the voltage threshold that the end-user specifies with the Arm Level input and has the slope that the end-user specifies with the Trigger Slope input.
    node_icon
    Configures the glitch arm. A glitch arm occurs when the arm signal has a pulse with a width that is less than or greater than the glitch width.
    node_icon
    Configures the digitizer to arm based on multiple arm sources.
    node_icon
    Configures the runt arm. A runt occurs when the arm signal crosses one of the runt thresholds twice without crossing the other runt threshold.
    node_icon
    Configures the digitizer for TV arming. This node configures the TV signal format, the event, and the signal polarity.
    node_icon
    Configures the width arm source and the IviDigitizer Arm Level, IviDigitizer Width Arm Low Threshold, IviDigitizer Width Arm High Threshold, IviDigitizer Width Arm Polarity, and IviDigitizer Width Arm Condition properties.
    node_icon
    Configures the window arm source, and the IviDigitizer Window Arm Low Threshold , IviDigitizer Window Arm High Threshold, and IviDigitizer Window Arm Condition properties.
    node_icon
    Returns the physical channel identifier that corresponds to the one-based index that the user specifies.

    Recently Viewed Topics