Configures the IviCounter Channel Level and IviCounter Hysteresis properties for a particular channel.
Specify the hysteresis you want the counter to use for the channel. The driver sets the IviCounter Channel Hysteresis property to this value. Units: volt Default Value: 0.65
The instrument handle you obtain from the IviCounter Initialize node or IviCounter Initialize With Options node. The handle identifies a particular instrument session.
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
|error in does not contain an error||error in contains an error|
|If no error occurred before the node runs, the node begins execution normally.
If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.
|If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.|
Default: No error
Specifies the name of the channel to configure. Pass the virtual channel name that you assign to the instrument in the Configuration Utility. Users who want to achieve interchangeability should use a virtual channel name. The virtual channel name should be sufficiently specific to the test system such that it is unlikely to conflict with a physical channel name. Virtual channel names are aliases for instrument-specific channel strings. The instrument-specific channel strings can differ from one instrument to another. Virtual channel names allow you to use and swap instruments without having to change the channel names in your source code. You assign a virtual channel name to an instrument-specific channel through the Configuration Utility. This control accepts virtual channel names you have assigned to the specific instrument you are using. It also accepts the instrument-specific channel names. Default Value: "" Notes: You can specify the channel name as a string variable or as a literal enclosed in double quotes.
Specify the level you want the counter to use for the channel. The driver sets the IviCounter Channel Level property to this value. Units: volt Default Value: 0.0
Where This Node Can Run:
Desktop OS: Windows
FPGA: Not supported
Web Server: Not supported in VIs that run in a web application