Table Of Contents

IviACPwr Configure Current Protection [CP] (G Dataflow)

Version:
    Last Modified: October 24, 2017

    Configures current protection. When the Current Protection Enabled input is True, the power source enters the current protection state (tripped) and disables the output when the output current exceeds the current threshold for the current delay time. When the Current Protection Enabled input is False, the threshold and delay do not affect the behavior of the instrument and current protection is disabled.

    connector_pane_image
    datatype_icon

    Threshold

    Specifies the current threshold that triggers over current protection. The driver uses this value to set IviACPower Current Protection Threshold [CP] property. Default Value: None

    datatype_icon

    instrument handle

    The instrument handle that you obtain from IviACPwr Initialize or IviACPwr Initialize With Options. The handle identifies a particular instrument session.

    Default: None

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    Phase Name ("")

    Specifies the name of the output phase to configure. Pass the virtual output phase name that you assign to the instrument in the IVI Configuration utility. Users who want to achieve interchangeability should use a virtual output phase name. The virtual output phase name should be sufficiently specific to the test system such that it is unlikely to conflict with a physical output phase name. Virtual output phase names are aliases for instrument-specific output phase strings, which can differ from one instrument to another. With virtual output phase names, you can use and swap instruments without having to change the output phase names in your source code. Assign a virtual output phase name to an instrument-specific output phase through the IVI Configuration utility. This control accepts virtual output phase names you have assigned to the specific instrument you are using and also accepts the instrument-specific output phase names. Default Value: "" Note: You can specify the output phase name as a string variable or as a literal enclosed in double quotes.

    datatype_icon

    Current Protection Enabled (True)

    Enables or disables current protection. The driver uses this value to set IviACPwr Current Protection Enabled [CP] property. Valid Values: TRUE - Enables the current protection. FALSE - Disables the current protection. Default Value: True

    datatype_icon

    Delay

    Specifies the time the output current must exceed the over current protection threshold until over current protection is triggered. The driver uses this value to set IviACPwr Current Protection Delay [CP] property. Unit: second Default Value: None

    datatype_icon

    instrument handle out

    The instrument handle that you obtain from IviACPwr Initialize or IviACPwr Initialize With Options.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics