Table Of Contents

IVI Oscilloscope Trigger (G Dataflow)

Version:
    Last Modified: October 23, 2017

    node_icon
    Configures the common properties of the trigger subsystem. These properties are the trigger type and holdoff.
    node_icon
    Configures the trigger coupling.
    node_icon
    Configures the edge trigger. An edge trigger occurs when the trigger signal passes through the voltage threshold that you specify with the Trigger Level parameter and has the slope that you specify with the Trigger Slope parameter.
    node_icon
    Configures the oscilloscope's trigger modifier.
    node_icon
    Configures the oscilloscope for TV triggering. This node configures the TV signal format, the event, and the signal polarity.
    node_icon
    Configures the TV line upon which the oscilloscope triggers. The line number is absolute and not relative to the field of the TV signal.
    node_icon
    Configures the oscilloscope for runt triggering. This node configures the low threshold, high threshold, runt polarity, and trigger source.
    node_icon
    Configures the glitch trigger. A glitch trigger occurs when the trigger signal has a pulse with a width that is less than or greater than the glitch width.
    node_icon
    Specifies whether a pulse that is within or outside the high and low thresholds triggers the oscilloscope.
    node_icon
    Specifies the slope of the zero crossing upon which the scope triggers.

    Recently Viewed Topics