Table Of Contents

Oscilloscope Acquisition (G Dataflow)

Last Modified: October 23, 2017

node_icon
Configures the most commonly configured properties of the oscilloscope acquisition subsystem. These properties are the time per record, minimum record length, and the acquisition start time.
node_icon
Configures how the oscilloscope acquires data and how it fills the waveform record.
node_icon
Configures the number of waveforms that the oscilloscope acquires and averages. After the oscilloscope acquires as many waveforms as you specify, it returns to the idle state.
node_icon
Configures the number of waveforms the oscilloscope acquires and analyzes to create the minimum and maximum waveforms. After the oscilloscope acquires as many waveforms as you specify, it returns to the idle state.
node_icon
Configures the interpolation method the oscilloscope uses when it cannot sample a voltage for a point in the waveform record.
node_icon
Configures the oscilloscope to perform continuous acquisition.

Recently Viewed Topics