Table Of Contents

Using NI Skyline Tags to Exchange Data between FlexLogger and LabVIEW

Version:
    Last Modified: September 14, 2018

    Configure your system to use the FlexLogger Skyline feature to exchange data with LabVIEW.

    The following FlexLogger and LabVIEW software versions are required to support the Skyline data tag feature:
    • LabVIEW 2017 or later
    • FlexLogger 2018 R4 or later
    1. Install LabVIEW.
    2. Install FlexLogger, ensuring to select NI Skyline Tag Support for LabVIEW <version> from the Additional items you may wish to install dialog.

      If you have already installed FlexLogger and would like to add NI Skyline tag support, complete the following steps.

      1. Open NI Package Manager and locate FlexLogger <version> on the Installed tab.
      2. Hover over the row to see the Install or remove related packages gear.
      3. Select NI Skyline Tag Support for LabVIEW <version> and click Next.
      4. Follow the instructions to complete installation of Skyline tag support.

    spd-note-note
    Note  

    To exchange data with LabVIEW, you must create and configure a FlexLogger project. For more information on this, refer to the FlexLogger Projects topic and the Configuring and Saving a Project topic.

    1. In your configured FlexLogger project, go to Project»Settings and ensure that the Publish Skyline Tags and Consume External Skyline Tags options are checked.

      After enabling these options for the first time, you will need to close and re-open your project.

    2. Navigate to Program Files»National Instruments»FlexLogger <versionExamples to locate FlexLogger Tag Examples.lvproj. This LabVIEW project contains several example VIs to get you started with exchanging data using the Skyline tags.

    Recently Viewed Topics