Table Of Contents

NI-5771 Front Panel

Version:
    Last Modified: May 10, 2017

    Table 1. NI-5771 Front Panel Connectors
    Device Front Panel [1] Connector Signal Description
    CLK IN External clock input, 50 Ω, single-ended (SE)
    CLK OUT Exported clock output
    REF IN Reference clock input, 50 Ω, SE
    AI 0 Analog input channel 0, 50 Ω, SE
    AI 1 Analog input channel 1, 50 Ω, SE
    TRIG Trigger input and output channel
    AUX I/O Digital I/O and PFI connector
    spd-note-caution
    Caution  

    To avoid permanent damage to the NI-5771, disconnect all signals connected to the NI-5771 before powering down the module, and connect signals only after the adapter module has been powered on by the FlexRIO FPGA module or Controller for FlexRIO.

    spd-note-caution
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI-5771 can damage the device and the chassis. NI is not liable for any damage resulting from such connections.

    • 1 Disconnect or disable any external clock or digital connections to the NI-5771 front panel. Applying external signals while the device is powered off may cause damage.

    Recently Viewed Topics