From 1:00 AM - 02:00 AM CST on Saturday, July 4, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

PCI-6602 Pinout

Version:
    Last Modified: March 20, 2017

    Table 1. Signal Descriptions
    Signal Reference Description

    PFI <0..31>/P0.<0..31>

    D GND

    Programmable Function Interface or Digital I/O Channels—Each of these terminals can be individually configured as a PFI terminal or a digital I/O terminal.

    As an input, each PFI terminal can be used to supply an external source for DO timing signals or counter/timer edge or level polarity selection. As a PFI output, you can route many different internal DI or DO timing signals to each PFI terminal. You can also route certain counter/timer outputs to PFI <24..31> terminals.. As a port 0 digital I/O signal, you can individually configure each signal as an input or output.

    PFI <32..39>

    D GND

    Programmable Function InterfaceAs an input, each PFI terminal can be used to route an external source for DO timing signals or counter/timer edge or level polarity selection. As a PFI output, you can route many different internal DI or DO timing signals to each PFI terminal. You can also route certain counter/timer outputs to these terminals.

    +5 V

    D GND

    +5 V Power SourceThese pins can provide +5 V power.

    RESERVED

    Reserved.

    R GND

    Restricted Ground—Tied to D GND. These terminals are routed to RESERVED when using the product with a SH68-68-D1 shielded cable or routed to D GND when using the product with a R6868 ribbon cable.

    D GND

    Digital Ground—These terminals supply the reference for the PFI and digital signals at the I/O connector and the +5 VDC supply.


    Recently Viewed Topics